The two most common types include dry chemical (sodium bicarbonate or monoammonium phosphate) and carbon dioxide (CO2), both of which are not hazardous. To empty contents, discharge outside, away from children or pets. Monoammonium phosphate is an irritant to eyes and the respiratory tract. Wear goggles and particulate mask when discharging extinguisher.
Dry Chemical Extinguishers
- May be discharged in an area where an acidic fertilizer would be used such as around evergreens. Do not use on lawns
- When relieving the pressure (emptying) the container for disposal, review manufacturers’ instructions, or, if unavailable, use the PASS technique:
- Pull the pin; this unlocks the operating lever and allows you to discharge the extinguisher. Some extinguishers may have other seals or tamper indicators
- Aim low; Point the extinguisher nozzle (or hose) at the base of the item
- Squeeze the lever above the handle: this discharges the extinguishing agent. Releasing the lever will stop the discharge (some extinguishers have a button instead of a lever)
- Sweep from side to side
- After pressure has been relieved (when nothing else comes out) remove the head from the container and place it with scrap metal or in the trash
Carbon Dioxide Extinguishers
- These extinguishers are refillable and should be refilled after each use. Check the Yellow Pages under "Fire Extinguishers - Recharging"
- If the extinguisher becomes defective, drill holes in the cylinder after pressure has been relieved and then place in the trash
- Ask fire equipment companies in your area if they will accept used extinguishers (listed in the Yellow Pages)
Very Old Fire Extinguishers
- Consult fire department. Very old fire extinguishers may contain carbon tetrachloride, a known carcinogen
- Take to a Household Hazardous Waste Collection Event (visit the Household Hazardous Waste Collection page for more information)